Konica Minolta Drypro 832, Manual

Page: 55 / 84

1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
55
4�2 Error Display and Solutions
When an error occurs, the error message and solutions are displayed in the message display window
on the operation panel.
4�2�1 Display and Solutions on Operation Panel
Error messages and solutions shown in the message display window on the operation panel are as
follows.
Error Type Display Message Example
Description of
Error
Solutions
C error Cxxxx Caution Minor
error There is no need to deal with it.
E error E4x1x: <Error message>
Open the Front Cover Film jam Remove the stuck film.
“4.4 How to Clear a Film Jam”
(page 57)
Exxxx: <Error message>
Press Reset button Errors other
than film jam Check the description of the error, deal with
the error, and then press the
[Reset/
Cancel] button.
“4.3.1 Reset from Operation Panel”
(page 56)
F error Fxxxx: <Error message>
Turn OFF the power Internal error Press the operation switch until a beep
sounds (approximately one second) and
shut down this machine. Check that the
machine has been shut down and then
press and hold the operation switch until a
beep sounds (approximately one second), to
restart the machine.
“4.3.1 Reset from Operation Panel”
(page 56)
E error E9211: <Error message>
Press Reset button The entered
image film size/
type is incor-
rect (occurs
when an item in
queue remains
and the film
size or type is
changed on the
main unit op-
eration panel.) A film size/type input image that differs from
the main unit settings was specified. Check
the film size/type settings for the input
destination modality, and press the
[Reset/Cancel] button.
“4.3.1 Reset from Operation Panel”
(page 56)
Note: “xxxx” indicates the notation in hexadecimal (0 to 9 or A to F).