Konica Minolta Drypro 832, Manual

Page: 51 / 84

1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
51
Film Related Settings
The following messages appear in the message display window.
• The film size and type are displayed as values set for the target tray.
2
If there are films or paper trays inside the supply tray, remove them�
3
Check the attachment position of the film regulation pin�
(A) Film regulation pin
mounting hole (14x14 in.)
Guide hole
Film regulation pin
mounting hole
Intermediate Plate
(B) Film regulation pin
mounting hole (11x14 in.)
Size of film to be used Attachment position of film regulation pin
14x17 in. None (film regulation pin is not used)
14x14 in. (A)
11x14 in. (B)
Do not place objects on the supply tray or lean on the supply tray
when it is pulled out� Failure to do so could cause fault�
Do not leave allen keys, film regulation pins, screws, or other items
inside the supply tray� Doing so could cause a failure�
The film regulation pins in the four corners of the supply tray are
fixed in place and cannot be changed.