10
Specifying Settings Using PageScope Web Connection
10-8
bizhub 750/600
Spe
c
if
ying
Set
ti
ng
s Usin
g Pag
e
Scope
We
b Co
nne
ctio
n
Chapter 10
Web Browser Cache
The newest information may not appear in the PageScope Web Connection
pages because older versions of pages are saved in the cache for the Web
browser. In addition, the following problems may occur when the cache is
used.
When using PageScope Web Connection, disable the cache for the Web
browser.
2
Note
If the utility is used with the cache enabled and Administrator mode was
timed out, the timeout page may appear even when PageScope Web
Connection is accessed again. In addition, since the machine’s control
panel is locked and cannot be used for the specified length of time (1
minute or the time set for “Admin Logout Time”), the machine must be re-
started. In order to avoid this problem, disable the cache.
2
Note
The menus and commands may vary depending on the Web browser ver-
sion. For details, refer to Help for the Web browser.
For Internet Explorer
1
On the “Tools” menu, click “Internet Options”.
2
On the General tab, click [Settings] under “Temporary Internet files”.
3
Select “Every visit to the page”, and then click [OK].
For Netscape
1
On the “Edit” menu, click “Preferences”.
2
In the “Category” box on the left side of the dialog box, click “Ad-
vanced”, then “Cache”.
3
Under “Compare the page in the cache to the page on the network:”,
select “Every time I view the page”.
bizhub_750.book Page 8 Monday, February 27, 2006 2:41 PM
