Konica Minolta BIZHUB 130F, User Manual

Page: 173 / 192

Maintenance and Troubleshooting
15
130f 15-23
15.2.4 “Check Message” printouts
When there is a problem with a fax call and your machine detects an error,
it produces an error printout headed by the words “Check Message”. This
printout lists the follow-ing information about the fax transaction:
G
The resulting error code (See “Error code” on page 15-24 .)
G A communications error message (See “What error messages can
mean,” below.)
G
The TTI (or phone number) of the fax machine with which your
machine had attempted to communicate.
What error messages can mean
The error messages on Check Message printouts can mean a variety of
things. Here is a brief summary:
Error message Possible meanings
Check condition of remote
fax. • Remote machine malfunctioned
• No Handshake signals from remote fax
• Wrong phone number reached
Repeat transmission. • Poor phone line conditions No Handshake signals from
remote fax Document misfeed or miscount
Unable to reach remote machine after attempting
specifed number of redial tries
Line is busy. • Remote machine s line was busy
• Remote machine s line didn t answer
Check received documents. • Remote conf rmation signal not received from remote fax
• Poor line conditions caused a poor image
Memory full. • Remote fax s memory is full
Dialling number is not set. • Stored phone number failed to dial properly
Stopped. • Someone pressed [Stop] at the remote fax in the
• middle of the Handshake