Konica Minolta BIZHUB 130F, User Manual

Page: 169 / 192

Maintenance and Troubleshooting
15
130f 15-19
Enter No. (0-32) You tried to enter a call group number greater than 32. Your machine
can maintain 32 call groups, numbered 1–32 (call group 0 covers all
the groups). Enter the correct call group identifier number
Enter Reduce/
Enlarge You tried to copy your document on the paper other than A4, A5 or
F4 size using the bypass tray, or the calculated zoom ratio is out of
the acceptable range (25 – 400 %). Enter the zoom ratio manually
although a part of the image might be lacked, or change the paper
for copying.
Enter Scan Size
When you using the documen
t glass, you must manually enter
the scan size of your document. Press [DOCUMENT SIZE]
to
choose the size.
Feeder In Use The command you are trying to enter requires the use of the ADF,
which is already in
use. Wait for the machine to stop using the ADF, then try again.
Hang Up Phone The external telephone is not sitting completely on its cradle.
In Relay Box or In
Secure Box You tried to store a document into the F-code box which is set to be
a relay box or security box. Select the F-code box which is set to be
a bulletin box.
Invalid I.D. Code The F-code box I.D. code you entered is not valid. Try re-entering
your F-code box I.D. code.
Invalid Number You pressed a key which has no function during the current
operation.
Invalid Passcode The protection passcode (see “12 Restricting use of the machine
[CD]”) you entered is not valid. Repeat the operation, entering the
correct protection passcode.
Line Busy You tried to erase a document which someone is polling from your
machine. Wait for the fax to complete the polling operation.
Macro In Use You tried to change the function for a Soft key, but that Soft key has
been programmed in a Macro key. You cannot change the Soft key
function until erase the Macro key that contains the Soft key you
want to change. Erase the Macro, then try again.
Memory Overf low
Start or Cancel You tried to enter more pages into memory than your machine could
store. Press [START]
to tell your machine to keep as many pages in memory as possible,
or press [CANCEL] to delete from memory all pages stored during
this operation (but not previous operations).
Memory Overf low
Press Stop In PC printing, the machine received data more than it can f it in
memory. Press [STOP] to cancel the printing job. Either delete
unnecessary documents, retry after more memory becomes
available, or split the printing into more than one operation.
Mirror Carriage Error The mirror carriage of your machine has become inoperable.
Contact your local technical representative.
Mirror Locked The transport mode is not turned off. Turn off the transport mode
(see page 2-12).
No Command Stored You pressed [JOB CONFIRM./FAX CANCEL] to review upcoming
commands, but your machine had no stored.
– or –
You pressed a macro key which is not programmed any command.
Message on the
LCD What it means/What to do