Konica Minolta BIZHUB 130F, User Manual

Page: 123 / 192

Sending Faxes
8
130f 8-5
8.2 Sending a fax
8.2.1 Memory transmission
Sending a fax using the ADF
1
Switch to the Fax mode by pressing
[Copy]
% [Fax] % [Scan]
.
2
Place your document on the ADF.
(See page 3-7 for details.)
3
Adjust the scanning resolution and contrast, if necessary.
(See page 8-1.)
4
Dial the fax number.
H
Use the numeric keys to dial a number.
or
H
Press a one-touch key. (See page 7-3.)
or
H Press [Speed Dial/Group] and three-digit code. (See page 7-12.)
or
H Use the call group dialling. (See page 7-13.)
or
H Use the phone directory dialling. (See page 7-13.)
5
Press [Start]. (If you pressed a one-touch key, no need to press
[Start].)
By pressing [Start], you are just
given your machine a command.
This command number appears on
the first line of the LCD for a few
seconds. You will need to know this
command number if you later wish to cancel the transmission or to
print a stored document. (See
“Reviewing or cancelling commands
[CD]” on page 8-10
.)
6
At the end of the operation, your
machine beeps and displays:
Whenever you transmit a
document, what actually appears on
the top line of the LCD depends on information stored in the remote
fax machine. The line may even be blank.
Fax Ready
27 Nov 2004 14:15
== Command:01 ==
919725552009
Complete
* * * *