Konica Minolta AIRe Lens User Manual Download Page 37

Page: 37 / 118

AIRe Lens

3-15

3.2

Using the AIRe Lens

If changes in brightness are annoying
Switch to Manual brightness adjustment (Home Screen Setup).
1. Change Auto

Manual (p. 3-40).

Setup

Brightness

Auto Control

OFF

2. Configure the brightness (fixed) setting (p. 3-40).
Setup

Brightness

Level (Manual)

When shipped from the factory, brightness adjustment is set to Auto.

3.2.4

Removing the product

Long press (three seconds) the C-BOX power button to power down.

Refer to page 3-10.

While pressing the headband button, loosen the headband.

Remove the HMD from the head.

Fold the HMD temples and insert them into the holder on the shoulder strap.

Remove the shoulder strap.

Remove the glasses.

Summary of Contents for AIRe Lens























































































































Search results

Summary of Contents for AIRe Lens

Reviews:

Related manuals for AIRe Lens

Brands by name

Popular brands

Konica Minolta AIRe Lens, User Manual

Search results

Summary of Contents for AIRe Lens

Reviews:

Related manuals for AIRe Lens

Brands by name

Popular brands