Konica Minolta AIRe Lens User Manual Download Page 67

Page: 67 / 118

AIRe Lens

3-45

3.12

Settings

3.12.10

AIRe Lens information

AIRe Lens information can be used to check battery levels, network information, and other information.

Start up the Settings app and select the Information item to display a AIRe Lens information screen. The items
displayed on the screen are shown below.

Display Items

Button Operations

Screen Image

Item

Function

Battery 1 Remain

Compartment (1) battery level

Battery 2 Remain

Compartment (2) battery level

Storage Used

Amount of internal storage used

IP Address

IP address assigned to this product

MAC Address

Physical address of the wireless adapter being used by this product

WLAN Country Code

Wireless LAN country code

Firmware Version

Firmware version

Kernel Version

Firmware (kernel) version

Rootfs Version

Firmware (rootfs) version

Button

Operation

Move the cursor one line upwards.

Move the cursor one line downwards.

Return to the previous screen.

D, E

(Not used.)

Summary of Contents for AIRe Lens























































































































Search results

Summary of Contents for AIRe Lens

Reviews:

Related manuals for AIRe Lens

Brands by name

Popular brands

Konica Minolta AIRe Lens, User Manual

Search results

Summary of Contents for AIRe Lens

Reviews:

Related manuals for AIRe Lens

Brands by name

Popular brands