Konica Minolta AIRe Lens User Manual Download Page 62

Page: 62 / 118

3-40

AIRe Lens

Settings

3.12

3.12.4

Auto brightness setting

Turns on/off auto brightness adjustment.

The current setting value is indicated by a check mark

Button Operations

Screen Image

3.12.5

Brightness level setting

Configures the brightness level when auto brightness adjustment is turned off. Brightness can be selected to
one of six levels from 0 to 5. A larger value increases brightness.

The current setting is displayed as a value on a vertical indicator.

Button Operations

Screen Image

Button

Operation

Move the cursor upwards.

Move the cursor downwards.

Return to the previous screen.

D, E

Configure the currently selected settings.

Short press

Button

Operation

Raise the brightness setting by 1.

Lower the brightness setting by 1.

Return to the previous screen.

D, E

Configure the currently selected settings.

Short press

Summary of Contents for AIRe Lens























































































































Search results

Summary of Contents for AIRe Lens

Reviews:

Related manuals for AIRe Lens

Brands by name

Popular brands

Konica Minolta AIRe Lens, User Manual

Search results

Summary of Contents for AIRe Lens

Reviews:

Related manuals for AIRe Lens

Brands by name

Popular brands