11
Tandam Wheel Instructions
Carefully insert the wheel axle pivot bushings into the ends of the wheel arm tubes. Tap the bushings
into the ends of the tubes with a block of wood or rubberized hammer.
Before mounting the tires, install the wheel spindle bolts as shown.
Take care to install the pins from the
inside as shown with the clip pins on
the outside of the wheel arm.
Never use a steel block or hammer directly
on the bushings as they are from a material
which can crack or burr easily.
The linkage length from centre to centre "Di-
mension A" should be set at:
A = 28" (71cm) for 20" clearance tines.
A = 28.5" (73cm) for 24" clearance tines.
Wheel Linkage Assembly
Assemble the wheel linkage as shown below with the pivot pins provided.
Note that the wheel pivot link shown below is a 2 piece adjustable linkage. This linkage can be length-
ened or shortened as necessary to provide proper under frame clearance for 20" or 24" tine options.
This adjustable wheel link also provides side to side levelling for the centre section.
Summary of Contents for VIBRO TILL 2900 Series
Page 44: ...44 660 005 033 February 2016...
