10 - ACCESSORIES
10 - ACCESSORIES
###_10_###
General information
Accessories or optional equipment listed hereafter may
be part of the standard equipment for certain countries.
Some of these accessories or options may not be avail-
able in certain markets.
Collector III unit
The Collector III unit allows to convey the cut crop on the
top of the previous cut windrow in one operation during
mowing.
The Collector III unit consists of:
• A suspension
(1)
, which is connected to the wheel
frame of the standard implement with bolts.
• A belt unit
(4)
, which is suspended in a frame
(3)
behind
the implement.
• A hydraulic pump, which is driven via the Power Take-
Off (PTO) shaft of the mower. When the belt unit
(4)
is
not in use, you can activate the hydraulic system to lift
the Collector III unit with the hydraulic cylinder
(2)
.
• A hydraulic tank
(5)
, which is on the frame of the mower
The only requirement for the tractor is an additional single
acting hydraulic outlet to lift the Collector III unit during
work and transport.
ZEIL18HT00874FA
1
High guide shoe set
If you want a stubble height higher than approximately
100 mm
(
3.94 in
), which is possible with the standard im-
plement, a set of high guide shoes can be delivered.
The high guide shoes
(2)
are mounted by means of the
supplied bolts under the standard shoes
(1)
.
The high guide shoe set raises the base cutting height
with
27 mm
(
1.06 in
). The maximum stubble height is
increased to approximately
120 mm
(
4.72 in
).
The high guide shoe set is suitable for very stony ground
and where there is a large amount of contaminated debris
on the ground not to be mixed with the crop.
ZEIL18HT00148AA
1
10-1
Summary of Contents for GMT 3205 L P
Page 46: ...2 SAFETY INFORMATION 2 26 ...
Page 50: ...3 CONTROLS AND INSTRUMENTS 3 4 ...
Page 170: ...8 TROUBLESHOOTING 8 4 ...
Page 186: ...11 FORMS AND DECLARATIONS 11 4 ...
