Installation
20220505H
85
4.31
Dockside settings
The following menu items are accessible and can be set up in the
Dockside Menu:
•
Boat type
•
Drive Unit voltage
•
Rudder Feedback calibration
•
Automatic Rudder test
•
Transition Speed
In addition the Dockside Menu display will show:
•
Drive output
•
Clutch/bypass verification
Select STBY mode and enter the IM as previously described.
Select "Dockside" by pressing STBD [>] button and confirm by
rotating the course knob.
Dockside
Boat type Planing
Drive unit voltage ---
Rudd feedb cal STBD ---
Rudd feedb cal PORT ---
Rudder test ---
-------- drive
Clutch ------
Transition speed 00kn
Planing
Displacement
Sail
Actual boat type is selected by turning the rotary course knob.
The options are: Displacement, Planing, Sail.
Type of boat will affect the steering parameters, and the
functions available in the autopilot system. Select appropriate
boat type and press STBD [>] button.
Drive unit voltage selection
This menu option requires the installer to set the drive unit
voltage to the correct level. The selections are 12V or 24V and
should be set to the voltage specified for your drive unit.
Note !
Selection of improper voltage level for your drive unit may
damage both the drive unit and junction unit even if the
protection circuits in the junction unit are activated.