Kongsberg MBR 144 OEM Instruction Manual Download Page 61

Page: 61 / 74

G210–58/2

Technical specifications

Topics

Performance specifications, page 59

Interface specifications, page 59

Frequency specifications, page 60

Weights and outline dimensions, page 61

Power specifications, page 61

Environmental specifications, page 61

Standards and regulations, page 62

Manufacturer’s conformity declaration, page 63

Performance specifications

These performance specifications summarize the main functional and operational
characteristics of the MBR 144 OEM.

•

Operating range

: 20 km (Dependent on antenna placement and height).

•

User data

: 0.7 – 16.5 Mbps

– Available rates: 0.7, 1.4, 2.8, 8.5, 16.5 Mbps

•

Antenna coverage

: 360 degrees azimuth, omnidirectional

Interface specifications

The system will interface with external systems and sensors via Ethernet.

The MBR 144 OEM product is available in two versions.

Technical specifications

Summary of Contents for MBR 144 OEM











































































Search results

Summary of Contents for MBR 144 OEM

Reviews:

Related manuals for MBR 144 OEM

Brands by name

Popular brands

Kongsberg MBR 144 OEM, Instruction Manual

Search results

Summary of Contents for MBR 144 OEM

Reviews:

Related manuals for MBR 144 OEM

Brands by name

Popular brands