Kongsberg MBR 144 OEM Instruction Manual Download

Page: 38 / 74

G210–58/2

Sent wireless headers

This is the number of wireless frames sent from this site (IP frames and
management data).

Transmit busy

This shows the number of datagrams currently in queue for transmission.

No link

This shows the frames which have not been sent due to no link.

Link busy

This shows the frames which have not been sent due to a full transmission queue.

MAC busy

This shows the frames which have not been sent due to a busy MAC (media access
control) controller.

Received headers

This is the counter for received wireless headers.

Received datagrams

This is the counter for received decoded datagrams.

Checksum errors

This is the counter for Checksum errors.

Functions and dialog boxes

Topics

Menu system, page 37

MBR Configuration Wizard, page 38

Configuration guide, page 38

Create site, page 39

Add radios to site, page 40

Configure site, page 41

Local Host List, page 43

Status, page 44

Edit network, page 45

Resource management, page 46

Join network, page 48

MBR 144 OEM Instruction Manual

Summary of Contents for MBR 144 OEM











































































Search results

Summary of Contents for MBR 144 OEM

Reviews:

Related manuals for MBR 144 OEM

Brands by name

Popular brands

Kongsberg MBR 144 OEM, Instruction Manual

Search results

Summary of Contents for MBR 144 OEM

Reviews:

Related manuals for MBR 144 OEM

Brands by name

Popular brands