Kongsberg MBR 144 OEM, Instruction Manual

Page: 18 / 74

16
G210–58/2
2 Insert the power connector into the power source on the vessel. 24 V DC.
3 To turn off the Radio Unit, simply remove the power connector.
Result
The system is now ready for configuration.
Related topics
Enabling contact with the Radio Unit, page 16
Defining the IP address on the computer's network adapter, page 17
Setting to work summary, page 56
Enabling contact with the Radio Unit
To be able to set up and communicate with the Radio Unit you must enable contact
with the unit via a browser.
Prerequisites
In order to set up the Radio Unit you need these items.
• Computer with an Ethernet adapter.
• Up-to-date browser. For example Chrome or Firefox.
The IP address of the Radio Unit is found on a label at the rear of the unit.
You must define which IP Address and Subnet mask the Ethernet adapter in the computer
shall use for this communication.
Context
You only need the computer for configuration or re-configuration purposes.
Note
The
MBR Configuration Wizard
page only appears the first time you set up your site. After
the configuration is completed, the web interface takes you directly to the
Main
view.
Procedure
1 Set up the computer with:
•
IP Address
: 10.19.127.10
•
Subnet mask
: 255.255.0.0
2 Connect the computer to the Radio Unit via Ethernet.
3 Type the IP address of the Radio Unit in the browser address bar.
Observe that the
MBR Configuration Wizard
page appears.
MBR 144 OEM Instruction Manual