manualshive.com logo in svg

Kongsberg MBR 144 OEM, Instruction Manual

Share
Download
Kongsberg MBR 144 OEM Instruction Manual Download Page 14

12

G210–58/2

This device complies with Industry Canada (IC) license-exempt RSS standard(s).
Operation is subject to the following two conditions.

1

This device may not cause interference.

2

This device must accept any interference, including interference that may cause
undesired operation of the device.

Text in English

This radio transmitter (IC: 5637A-M144M2OEM) has been approved by Industry
Canada to operate with the antenna types listed below with the maximum permissible
gain and required antenna impedance for each antenna type indicated. Antenna types not
included in this list, having a gain greater than the maximum gain indicated for the type,
are strictly prohibited for use with this device.

This device has been designed to operate with the antenna(s) listed below, and having a
maximum gain of 6 dB. Antennas not included in this list or having a gain greater than 6
dB, are strictly prohibited for use with this device.

The required antenna impedance is 50 ohms.

Supported antennas:

• MBR 144 OEM antennas (MBR-E-ANTxx)

Texte en Français

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes.

1

L’appareil ne doit pas produire de brouillage.

2

L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillard
est susceptible d’en compromettre le fonctionnement.

Texte en Français

Le présent émetteur radio (IC: 5637A-M144M2OEM) a été approuvé par Innovation,
Sciences et Développement économique Canada pour fonctionner avec les types
d'antenne énumérés ci

‑

dessous et ayant un gain admissible maximal. Les types d'antenne

non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué pour
tout type figurant sur la liste, sont strictement interdits pour l'exploitation de l'émetteur.

Cet appareil a été conçu pour fonctionner avec les antennes listées ci-dessous et ayant
un gain maximum de 6 dB. Les antennes non incluses dans cette liste, ou ayant un gain
supérieur à 6 dB, sont strictement interdites pour l'exploitation de l'émetteur.

L'impédance d'antenne requise est de 50 ohms.

Antennes supportées:

• Antennes OEM MBR 144 (MBR-E-ANTxx)

MBR 144 OEM Instruction Manual

Summary of Contents for MBR 144 OEM











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands