23
Body Assembly 1
BT
(battery)
Box
SIO 5
SIO 1
Left Rear
Right Rear
Left Front
Right Front
SIO 6
SIO 2
Leg Side
（Lower）
Backpack Side
（Upper）
ID Seal
SIO Seal
Route through the
opposite side as well.
Route the cable on the side with
9 cm pulled out in the same
direction as
②-3.
Apply the decal to the cable.
M2 ー 6
x4
7cm
9cm
9cm
①-4.
Secure with tape, etc. so it doesn't come out easily.
＊As seen upside down
＊Firmly apply the tape
aligned with the uneven surface.
＊Firmly apply the tape
aligned with the uneven surface.
①-5.
Apply the decal to the cable.
（The diagram is only of the BT box plate
so that it is easy to view.）
BT Hatch x2
＊If installation proves difficult, try temporarily securing
the BT box plate and inserting one BT hatch at a time.
Hinge positions
BT Box plate
②
Wire two 200 mm ZH-ZH connection cables to the other BT box plate.
②-1
.Secure with tape, etc. so it doesn't come out easily.
②-2.
After routing the two cables, attach the BT
plate so that it sandwiches the BT hatch.
（Wired cable）
200mm x2
KXR-R4LL
