3
Precautions for use
ENGLISH
WARNING
•Be sure to follow the installation instructions. Wrong handling may cause a
machine trouble or accident. Contact an industry specialist or your nearest dealer
for installing this kit. (You will be charged.)
•The projector unit has some internal parts with high voltage. Only a qualified
industry specialist is allowed to open the back door of the machine. With this back
door open, be very careful not to touch unnecessary parts.
· Otherwise an accident or electric shock may result.
•Handle this kit with due care when installing it.
· Wrong handling may cause kit trouble or accident.
· Parts inside the PCB unit get hot structurally. Do not touch them until completely cooled
down.
· The PCB unit have some projections on them. Handle the PCB unit carefully not to get
injured.
•Do not leave anything, such as a water- or chemical-containing container, on top of
or close to the kit or the detached PCB unit.
· Electrical shock or damage could be caused by water or foreign matter entering the
inside of the kit.
•Before attaching or detaching the PCB unit, be sure to turn OFF the machine’s power
switch and unplug the power cord.
· Otherwise, a machine trouble or electric shock may result.
•Before installing the PCB unit, clean up the inside of the machine using a vacuum
cleaner or the like.
· If the electrical components are left covered with dust, an electric shock or fire may result.
•In installing the PCB unit in the machine, connect the connectors securely.
· Otherwise, a machine trouble or fire may be caused.
3