9
5
Connect the accompanying cables
between the detached connectors
and the power unit connectors.
See the figure at right.
•Be very careful not to confuse the
connectors. A fire may result.
6
Push the power unit back into place with care not to get the cables caught
inside the cabinet. Then fix it with the screws.
7
Reconnect the power plug, connector and grounding wire that were
disconnected in Step 2.
8
Place inside the cabinet the wooden
board that has the new PCB unit
on it. Move the wooden board all
the way to the right.
•Be sure to hold the wooden board
when setting the new PCB unit in
the cabinet.
1 Setting the kit in the machine
9
Finally fix the wooden board with the countersunk screws.
Connector(Red)
Connector(Red)
Connector(White)
Accmpanying cables
Accmpanying cables
Accmpanying cables
(Black/Orange)
Accmpanying cables
(Black/Red)
Connector(White)
Wooden board
PCB unit
Countersunk screws
