19
NETWORK OPTIONS
Sets and checks the network.
Move the shift lever up or down to select an item, and press the START button to enter
it. To return to the main menu screen, select “SAVE AND EXIT” or “EXIT” and press
the START button.
Sets and checks the network
•If any of the three items responds incorrectly, it indicates possible
communication malfunction. Take measures while referring to “2-5
Measures to be taken when there is a network abnormality” on page 24.
•If the machine still shows the same trouble or any troubles that are not
discussed in this manual, immediately turn OFF the power switch, unplug
the power cord and contact your nearest dealer.
·Check that the “I” mark in the STATUS column is moving from the left to the right at a fixed
speed.
·Check that the value in the ERROR column is below “10” after one minute.
·Check that the value in the DOWN column does not change from “0”.
Check items (Watch the screen for longer than 1 minute and make sure the following 3 conditions are met.)
THIS BOARD-ID IS 8
ERROR
DOWN
STATUS
PRESS START BUTTON = EXIT
NETWORK CHECK
ID
No.1 0 0 DNC
ID
No.2 0 0 DNC
ID
No.3 0 0 I
ID
No.4 0 0 DNC
ID
No.5 0 0 I
ID
No.6 0 0 DNC
ID
No.7 0 0 DNC
ID
No.8 0 0 DNC
•Shows “Network ID” of the connected
machine. (Number from 1 to 8)
•The “I” mark is moving from left to right when
the machine is networked.
•“DNC” (Did Not Connect) appears if the
machine is not networked.
NETWORK CHECK
select the following screen appears.
When networking the machines, be sure to check their networking status on this
screen. To return to the “NETWORK OPTIONS” screen, press the START button.
•Sets a network ID.
Enters different numbers (machine numbers) to
the machines that will be networked.
(Same numbers are not allowed.)
•Sets the communication wait time.
Choose from 4, 8, 12, 16, 20, 24, 28 and 32.
•Sets the communication-play course decision
by majority or by individual.
·DECIDED by MAJORITY...Course decided by
majority
·DECIDED INDIVIDUALLY...Course not decided
by majority
•This mode is used to check the network condition.
(See the figure below)
•This mode is used to automatically configure the
settings of the networked machined.(See page 21)
•Returns all the settings to the factory settings.
NETWORK ID
2
GAME JOINING PERIOD
12 counts
COURSE SELECTION
DESIDE by MAJORITY
NETWORK CHECK
NETWORK CONFIGURATION
FACTORY SETTINGS
SAVE AND EXIT
EXIT
GEAR SHIFT UP/DOWN = SELECT OPTION
PRESS START BUTTON = MODIFY SETTING
NETWORK OPTIONS
•This screen is just an example.
•This screen is just an example.
2 PCB settings
