background image

Please read and understand this entire manual before attempting to assemble, operate or install the product.

IMPORTANT NOTICE

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock 

and injury to persons, including the following:

WARNING: 

Place this unit in a location that avoids direct sunlight and high temperatures.

WARNING: 

Plastic bags, nails, etc. should be kept out of reach of children.

WARNING:

 This appliance is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. Keep 

combustible material, such as furniture, pillows, bedding, papers, clothes and curtains, at least 3 feet from the front 

of the heater and keep them away from the side and rear.

WARNING:

 Extreme caution is necessary when any heater is used by or near children or individuals with 

disabilities and whenever the fireplace is left operating and unattended. 

WARNING:

 DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or similar covering.

Do not route cord under furniture or appliances. Arrange cord away from traffic areas and where it will not be 

tripped over.

WARNING:

 DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause 

an electric shock or fire, or damage the appliance.

WARNING:

 This appliance has hot and arcing or sparking parts inside. DO NOT use it in areas where gasoline, 

paint or flammable vapors or liquids are used or stored. This fireplace should not be used as a drying rack for 

clothing. Christmas stockings or decorations should not be hung in the area of it.

3

General

 Informa

tIon

• To prevent a possible fire, DO NOT block any air intakes or exhaust in any manner. DO NOT use on soft surfaces, like a 

bed, where opening may become blocked.

• ALWAYS plug this unit directly into a wall outlet/receptacle. NEVER use with an extension cord or relocatable power tap 

(outlet/power strip).

• This heater includes an automatic protection system that will shut off the unit to prevent overheating. If the unit is at risk of 

overheating, the front panel will display "E1" and a thermal cut out will shut off the heater to prevent damage or risk of fire.

• DO NOT place any objects on top of firebox and top air intake vents as this will cause the unit to overheat and can cause a 

fire.

eleCtrICal ConneCtIon:

• A 15-amp, 120-volt, 60 Hz circuit with a properly grounded 

outlet  is  required.  Preferably,  the  fireplace  will  be  on 

a  dedicated  circuit  as  other  appliances  on  the  same 

circuit may cause the circuit breaker to trip or the fuse 

to blow when the heater is in operation. The unit comes 

standard with 6-ft. three-wire cord, exiting from the rear 

of  the  fireplace.  DO  NOT  exceed  the  current  rating  of 

the current tap. ALWAYS plug this unit directly into a wall 

outlet/receptacle. NEVER use with an extension cord or 

relocatable power tap (outlet/power strip).

• This firebox is for use on 120 volts. The cord has a plug as 

shown below. See illustration for grounding instruction. An 

adapter as shown at C is available for connecting three-

blade grounding type plugs to two-slot receptacles. The 

green  grounding  lug  extending  from  the  adapter  must 

be connected to a permanent ground such as a properly 

grounded outlet box. The adapter should not be used if a 

three-slot grounded receptacle is available.

Grounding Pin

Grounding Pin

Grounding Means

Adapter

a

C

B

D

Metal Screw

Cover of 

Grounding Box

eleCtrICal SPeCIfICatIonS

Voltage:

Amps:

Watts:

120 VAC, 60 Hz

11.7 Amps

1400 Watts

Summary of Contents for SP5735

































Reviews: