Komatsu PC12R-8, Operation & Maintenance Manual

Page: 82 / 208

80
GUARDS AND DRIVER’S SEAT
3.5.3.2 FRONT OPENING WINDSHIELD
CAUTION
•
When opening or closing the front windshield, be careful
not to crush your hands.
Always hold the handles firmly with both hands until the
windshield is completely opened or closed.
•
When the front windshield is open, make sure that the
lock engages with the rear coupling.
•
When closing the front windshield, seize the handles with
both hands and move it slowly until the lock engages.
•
Before opening the front windshield (7), disconnect the wind-
shield wiper connector (10) positioned on the right inner side
of the cab.
IMPORTANT
☞
•
If the front windshield is opened without disconnecting
the connector (10), the wiring that supplies power to the
windshield wiper motor will certainly be torn.
•
After pressing the lever (8), open the windshield (7) with the
handles (9) while pulling and lifting the windshield.
Move the windshield (7) to the correct position, so that it auto-
matically couples with the upper retaining seats.
To close the windshield, carry out the same operations in the
reverse order, after pressing the lever (11).
RWAA9320
7
9
10
9
8
RWAA9460
10
RWAA9380
11
RWAA9390
8