.
OPERATION
EXPLANATION OF COMPONENTS
DIMMER SWITCH
This switch (2) is used to switch the head lamps between high
beam and low beam.
(A) Low beam
(B) High beam
CAUTION/PILOT LAMP BULB CHECK SWITCH
Press this switch (3) when the starting switch is at the ON position
to check for any blown bulbs.
EXHAUST BRAKE SWITCH
(If equipped)
This switch (4) shows the operating condition of the exhaust brake.
If it is pushed once, it lights up; and it goes off when it is pushed
again.
OFF position (Light is off):
The exhaust brake is actuated when the brake pedal is depressed
or the retarder control lever is operated if the torque converter is in
the lockup condition.
ON position (Light is on):
The exhaust brake is actuated when the accelerator pedal is
released if the torque converter is in the lockup condition.
3 - 26
Summary of Contents for Galeo HD325-6
