.
MAINTENANCE
SERVICE PROCEDURE
MAINTENANCE
SERVICE PROCEDURE
2. Remove outer element (5).
3. Clean the air cleaner body interior and the cover.
4. Direct dry compressed air (less then 0.69 MPa (7 kg/cm
2
, 99.4
PSI)) along the folds of the element from the inside. Next, blow
with air along the folds from the outside, then blow with air
again from the inside.
1) Remove one seal every time the element is clean.
2) Replace the outer element if it has been cleaned 6 times
repeatedly or used throughout a year. Replace the inner
element at the same time.
3) Replace both inner and outer elements when the dust
indicator red piston appears soon after installing the
cleaned outer element even though it has not been
cleaned 6 times.
4) Remove evacuator valve (4) and clean it with compressed
air. After cleaning, install it again.
NOTICE
If small holes or thinner parts are found on the element when it is checked
with an electric bulb after cleaning and drying, replace the element.
When cleaning the element, do not hit it or beat it against something.
Do not use an element whose folds or gasket or seal are damaged.
5. Install the cleaned element, then install cover (3).
REPLACING INNER ELEMENT
1. First remove the cover and the outer element, and then remove the inner element.
2. Cover the air connector side (outlet side) with a clean cloth or tape.
3. Clean the air cleaner body interior, then remove the cover installed in Step 2.
4. Install a new inner element to the body.
Do not clean and re-use an inner element.
5. Install the outer element and the cover.
6. Remove evacuator valve (4) and clean it with compressed air. After cleaning, install it again.
7. After replacing the element, return the red piston in the dust indicator to its original position.
4 - 24
Summary of Contents for Galeo HD325-6
