INSTRUMENTS AND CONTROLS
86
WEAM009500
3.2.4.2 DOOR (machines with cab)
WARNING
q
When the cab door is opened or closed, always take the
safety device lever (1) to the locking position (L). If the con-
trol levers are not locked and are inadvertently operated,
there is the risk of serious accidents.
q
Make sure that the door is locked whether it is opened or
closed.
q
Always stop the machine on a flat surface before opening
or closing the door.
If the door is opened or closed on a slope, the effort re-
quired may suddenly change. Do not open or close the
door on slopes.
q
Be careful to your hands, in order to prevent them from be-
ing caught between the door and the front or centre pillar.
q
If there is anyone inside the cab, warn him/her before open-
ing or closing the door.
IMPORTANT
q
Always clean the step to access the cab. Possible mud or
ice accumulation can cause slipping.
The cab door (1) can be totally opened and held in place by the
catch (2).
This catch is automatic and is activated when the door (1) stops
against the buffer (3).
To release the door from the catch (2), take the lever (4) placed
on the left side of the cab.
RKA23830
RKAB9100
2
1
3
RKAB9670
4
Summary of Contents for PC26MR-3
