USE OF THE MACHINE AND RELATED CONTROLS
WEAM009500
99
3.3 USE OF THE MACHINE AND RELATED CONTROLS
3.3.1 BEFORE STARTING THE ENGINE
3.3.1.1 VISUAL CHECKS
Before starting the engine, look around the machine and under the machine to check for loose nuts or bolts, oil, fu-
el or coolant leakages, and check the conditions of the work equipment and the hydraulic system. Check also for
loose wires, excessive gaps, and accumulation of dust in places that reach high temperatures.
WARNING
q
When opening the engine hood and the radiator cover to
carry out checks and maintenance operations, always re-
member to secure them in the correct position with the ap-
posite retainer.
q
Immediately remove any flammable materials that may
have accumulated around the battery, the exhaust silencer
or other hot parts of the engine. Any oil or fuel leaks may
cause fire in the machine. Always perform thorough
checks and carry out the necessary repairs; if any fault oc-
curs repeatedly, contact your Komatsu Dealer.
q
Make sure that the cab floor is properly fastened with the
screws (1). If it is not properly fixed, serious injuries may
result.
Always perform the check with the machine parked on a
flat surface. If the machine is inclined, position it horizon-
tally before carrying out the check.
Carry out the following inspection and cleaning operations every
day before starting the engine.
1.
Check the work equipment, the cylinders, the articulations
and the pipes for damage, wear, excessive play.
If any anomaly is observed, provide for the necessary re-
pairs.
2.
Remove dirt and dust from around the engine, the battery, and the radiator.
Check that there is no dirt or dust accumulated around the engine or the radiator. Check also that there is no
flammable material (dry leaves, twigs, etc.) accumulated around the exhaust silencer, the hot parts of the en-
gine or around the battery. Remove all dirt, dust, and flammable materials.
3.
Make sure that there are no water or oil leakages around the engine.
Make sure that there are no oil leakages from the engine or coolant leakages from the cooling system. If any
anomaly is observed, provide for the necessary repairs.
4.
Make sure that there are no oil leakages from the hydraulic system, the hydraulic tank, pipes, and joints. Make
sure that there are no oil leakages. If any anomaly is observed, provide for the necessary repairs.
5.
Check the components of the undercarriage.
Check the tracks, the sprocket, the idler roller, and the guards for damage, wear, loose bolts, and make sure
that there are no oil leakages from the rollers, etc.
If any anomaly is observed, provide for the necessary repairs.
6.
Check the driver's post access handles and the steps to get on the machine.
Check that no bolt is damaged or loosened, repair the damaged parts and tighten any loosened bolt.
Summary of Contents for PC26MR-3
