Komatsu Utility PC26MR-3, Operation & Maintenance Manual

Page: 80 / 252

INSTRUMENTS AND CONTROLS
78 WEAM009500
2. - 3. Work equipment control levers
WARNING
q
Before carrying out any manoeuvre with these levers, the
operator must seat in the work position and fasten the seat
belt.
q
Before leaving the driver seat, lower the equipment to the
ground, lock the controls with the safety lever and stop the
engine.
IMPORTANT
q
The horn push button is positioned on the right lever grip
and must be used to warn all the people in the vicinity be-
fore starting work and in case of danger.
q
When the safety lever is in the “locked” position, all the
movements are inhibited (see "3.2.3 pos: 1. Safety lever
(control locking lever)").
A: Version with canopy
B: Version with cab
The control lever (2) is positioned on the operator’s left and con-
trols the arm and the turret swing.
q
Swing function
(a) Swing to the right
(b) Swing to the left
q
Arm
(c) Fold
(d) Extend
N (Neutral): the turret and the arm are held in the position where
they stopped.
The control lever (3) is positioned on the operator’s right and con-
trols the boom and the bucket.
q
Boom
(e) Lift
(f) Lower
q
Bucket
(g) Open
(h) Fold
N (Neutral): the boom and the bucket are held in the position
where they stopped.
RKA23610
RKA23620
RKA16230
RKA23630