Kolpin ATV-180 Owner'S Manual Download

Page: 115 / 127

115

•

Lubricate chain and cables with SAE 85W-140 oil or chain & cable oil.

VEHICLE MAINTENANCE (cont.)

TRANMSSION OIL CHANGE

Change the gear oil after the first 30 hours of operation. The recommended gear oil is SAE 85W-140.

1.

Run ATV for at least five (5) minutes or until warm. Turn off unit and remove the ignition key.

Place a suitable container for draining oil beneath the rear of engine.

Remove the transmission drain plug (located under rear of sprocket shaft). Let drain complete.

Remove fill plug located on left rear of engine case.

Inspect drain and fill plug gasket for damage. Replace with new gasket if damaged.

Replace drain plug, torque to 95 in. lbs.

Fill transmission through the oil fill plug with 7 oz. or 200 cc SAE 85W-140 gear oil.

Replace oil fill plug and start the engine.

Check for leaks.

Transmission
Oil Drain Plug

Transmission
Oil Fill Plug

Summary of Contents for ATV-180
































































































































Search results

Summary of Contents for ATV-180

Reviews:

Related manuals for ATV-180

Brands by name

Popular brands

Kolpin ATV-180, Owner'S Manual

Search results

Summary of Contents for ATV-180

Reviews:

Related manuals for ATV-180

Brands by name

Popular brands