19
RIDER’S SECTION –PRE-RIDE CHECK (cont.)
Make sure the seat is locked back in place.
Check the gas level. Before adding gasoline to your ATV read the instructions and warnings on page 33 of this
Owners Manual.
Check the engine oil level when the engine is cold. The engine is very hot after it has been running. It could burn
you.
Check the tires; check condition and pressures.
Brakelight – check for proper operation.
Engine Stop Switch – check for proper function.
Wheels – check for tightness of wheel nuts and axle nuts; check that axle nuts are secured by cotter pins.
Drive chain - check the drive chain slack.
Air cleaner – check for dirt. If the filter is dirty or clogged, clean or replace it.
Steering – check to be sure the steering operates freely. Look for any unusual looseness in any area.
Check free-play and operation of brakes levers.
Check throttle lever making sure you do not have sticky throttle lever (see pg. 43).
Loose parts – inspect ATV for any damaged parts or loose nuts/bolts or fasteners.
Operator’s helmet, goggles and proper clothing (long pants, long sleeves or jacket).
This last check is done with the engine running. You must check to make certain that the two ways to stop your
ATV are working the way they should:
1. Sliding the Engine Stop Switch left or write to the
position
2. Turning the Ignition Key to OFF.