Kollmorgen AKI2G-CDB-MOD-12T-000, Installation Manual

Page: 15 / 32

AKI2G-CDB-MOD-12T-000 | CHEMICAL RESISTANCE
5.2 Touch Screen and Overlay Material
5.2.1 Autoflex EBA 180L
Autoflex EBA 180L covers the overlay surrounding the screen.
Solvent Resistance
Autoflex EBA 180L withstands exposure of more than 24 hours duration under DIN 42 115 Part 2 to
the following chemicals without visible change:
Acetonitrile Diesel Petroleum spirit
(1)
Ajax / Vim in solution Downy / Lenor
(1)
Phosphoric acid (<30%)
Alkalicarbonate solution
(1)
Ethanol Potassium ferricyanide
Ammonia (<40%)
(1)
Glycerine Potassium hydroxide (<30%)
Acetic acid (<50%) Glycol Pure Turpentine
Ariel powder in solution
(1)
Gumption
(1)
SBP 60/95
(1)
Bleach
(1)
Hydrochloric acid (<36%) Sulfuric acid (<10%)
Castor oil Linseed oil Tomato ketchup
Caustic soda (<40%)
(1)
Methanol Trichloroacetic acid (<50%)
Cutting oil Nitric acid (<10%) White Spirit
Cyclohexanol Paraffin oil
Windex
(1)
Diacetone alcohol Persil powder in solution
(1)
(1)
Extremely faint glossing of the texture was noted.
Autoflex EBA 180L withstands DIN 42 115 Part 2 exposure of up to 1 hour duration to glacial acetic
acid without visible change.
Autoflex EBA 180L is not resistant to high pressure steam at over 100 °C or the following chemicals:
Concentrated mineral acids Benzyl alcohol
Concentrated caustic solution Methylene chloride
5.2.2 Touch Screen Surface (for 12” Panels)
The touch screen surface on the operator panel withstands exposure to the following solvents without
visible change:
The screen surface on the operator panel withstands exposure to the following solvents without
visible change:
Solvents Time
Acetone 10 minutes
Isopropanol 10 minutes
Toluene 5 hours
ky
Kollmorgen | April 2017 15