AKI-CDC-MOD-15T | ADDITIONAL INSTALLATION TIPS
8.8
Boot Priority
The boot priority is the order in which the hardware storage devices are read.
Pressing F7 during boot will display a drop down menu with all available bootable devices.
A change of the boot priority is only temporary. On next startup the boot priority will be restored back
to the factory setting.
8.9
Entering BIOS
Caution:
Unless you are an expert computer user, do not change the BIOS settings for this program.
Certain changes can cause your operator panel to work incorrectly.
Note:
Before using BIOS setup, it is recommended to write down the setup information for future
reference.
Note:
It is recommended to turn on and shut down the operator panel at least once before installing
any components/cards or before connecting the panel to external devices, like for example
serial devices.
1. Connect a USB Keyboard.
2. Connect power supply and turn on the operator panel.
3. While booting, press the F2 key immediately after the keyboard is initialized. The initialization is
indicated by the keyboard LED's.
If F2 is pressed before the keyboard is initialized, this keystroke will be lost.
If you waited too long and the operating system logo appears, continue to wait until the operating
system desktop is appearing. Then, shut down the operator panel and try again.
Note:
The keys used to enter the BIOS setup are DEL and F2.
The system setup allows to:
•
Change the system con
fi
guration (new installed hardware).
•
Setup boot devices and sequences.
•
Setup or change user options, for example passwords.
•
Read the installed memory and environmental parameters, for example CPU heat.
For more information, refer to the BIOS manual.
8.10
Reset Switch
A reset switch is located under the fan lid.
ky
Kollmorgen | October 2014
32
