![background image](http://html1.mh-extra.com/html/kollmorgen/aki-cdc-mod-15t/aki-cdc-mod-15t_installation-manuals_1990813018.webp)
AKI-CDC-MOD-15T | HARDWARE REPLACEMENT
4.4
Replacing the Battery
The following is needed:
•
A new BR 2032 (or CR 2032) battery.
•
A Torx screwdriver
Note:
Make sure to use adequate ESD protection.
Follow the steps below to replace the battery:
1. Power off the operator panel.
2. Follow the instructions in chapter
to remove the fan and access the
battery.
3. Replace the battery.
4. Reassemble in reverse order.
Figure 4-5:
1. Screw M4x35 Torx
2. Fan
3. Battery
ky
Kollmorgen | October 2014
18