Kolibri Domino User Manual Download Page 23

Page: 23 / 26

Other error messages:

Error Message

Cause

Solution

LOWER LEFT

COUNTING SENSOR

Issue with the lower left counting

sensor

Clean the sensor.

See section 6.1 Maintenance for

location of sensors.

UPPER LEFT

COUNTING SENSOR

Issue with the upper left counting

sensor

Clean the sensor.

See section 6.1 Maintenance for

location of sensors.

ENCODER

SENSOR

Issue with the encoder sensor

Restart the machine.

Make sure rollers are turning and noth-

ing prevents them from turning.

If not resolved contact Kolibri

technical service.

START

SENSOR

Issue with the start sensor.

Clean the sensor.

See section 6.1 Maintenance for

location of sensors.

BACK DOOR

OPEN

Back door not securely closed.

Ensure back door is closed.

Press start to continue.

Other possible errors:

Problem Description

Cause/Action

Machine does not turn on

Ensure the power cord is connected properly.

Check the fuse in the fuse compartment and replace it if necessary.

Contact Kolibri’s technical service center if the issue persists.

Machine fails to detect

counterfeit notes

The sensors may have collected dust.

See section 6.1 Maintenance for location of sensors.

Summary of Contents for Domino



























Search results

Summary of Contents for Domino

Reviews:

Related manuals for Domino

Brands by name

Popular brands

Kolibri Domino, User Manual

Search results

Summary of Contents for Domino

Reviews:

Related manuals for Domino

Brands by name

Popular brands