Kolibri Domino, User Manual

Page: 19 / 26

16
4. Guide the bill between the inner rollers during this step; you should feel moderate
resistence as you move the bill back and forth through these rollers. In other
words, the gap between these rollers is wide enough to pass just one bill per
count, but narrow enough to feel a slight tension or friction when pulling the bill out.
To adjust the bill feed gap, use the instructions below to
turn the adjustment screw at the top of the unit:
a) Adjust the knob, slight turn at a time and then retest.
b) If the bill feels too loose, tighten the feed gap by
turning the adjustment screw clockwise.
c) If the resistence against the bill feels too strong,
loosen the gap by turning the screw counterclockwise.
IMPORTANT NOTE:
The Kolibri Domino’s feed gap adjustment can be
sensitive during adjustments. Do not overturn
each adjustment or you may overshoot
the optimum gap. We recommend testing with
a stack of bills after each adjustment turn.