Kolibri Domino, User Manual

Page: 14 / 26

11
BATCH function is used to select a batch quantity for a specific counting process. With
the BATCH function active, the machine counts a preset number of bills and then stops
counting when the batch number has been reached, even if bills remain in the hopper.
By default, pressing the BATCH button will set the batch size to 100, 50, 20, 10, Off.
The batch size can be adjusted by pressing the +1/+10 or the BATCH button.
When the set batch amount is reached, the Kolibri Domino will automatically stop and
a “BATCH COMPLETE” message will be display on the screen alongside the number of
bills counted. When the stacker is emptied, the machine will automatically continue to
count up to the preset batch amount to create another batch.
If the hopper runs out of bills before a batch is completed, the machine will display
“INCOMPLETE BATCH” on screen. At this point, the user may add bills to the hopper to
complete the batch or remove the incomplete batch from the machine. To exit BATCH
function, press again the BATCH button until “BATCH” disappears from the home
screen.
4.4 Add+Batch Function
This function batches the desired quantity of bills and monitors the running total at
the same time. To activate this function, press the ADD and BATCH buttons separately,
both icons should be displayed on the screen.
To exit ADD+BATCH function, press the ADD and BATCH buttons again separately.
AFTER-COUNT FUNCTIONS
5.
5.1 Report
This function is available by pressing the REPORT button and provides an on-screen
report of the total amount of each denomination counted, the value of the counted bills
of that denomination, and a grand total value of all bills counted.
To exit the report screen, press the MENU button.
5.2 Serial Report
This function is available by pressing the REPORT button twice, it provides an on-
screen report of each bill counted with its serial number and denomination.
To exit the report screen, press the MENU button.