10
FUNCTIONS
4.
4.1
Auto and Manual Function
After turning the machine on it will default to AUTO function, an “A” will be displayed
on the home screen, machine starts counting automatically. To switch to the Manual
function, go to Menu by pressing MENU button, select:
1.
SETTINGS and press START/STOP button.
2.
When in settings menu select 2. AUTO/MANUAL START by going down with the
CLEAR button and press START/STOP to enter.
3.
Select 2. MANUAL and press START/STOP button to validate selection, check mark
will be displayed next to the selected function.
4.
Press MENU button 3 times to go back to the home screen. If MANUAL is selected, a
“M” will be displayed on the home screen.
If on Manual, Kolibri Domino will stop counting automatically and START/STOP button
must be pressed to begin each count. To go back to Auto function repeat steps listed
above and select AUTO function.
4.2
Add Function
This function is available by pressing the ADD button on the control panel. When ADD
function is activated, an “ADD” will be displayed on the home screen.
ADD function allows the user to count multiple stacks of bills while keeping track of the
total amount and value of bills counted. Place the first stack of bills to be counted in the
hopper. The number and value of bills will be displayed on screen. When ready to count
the next stack of bills, empty the stacker and add the new stack to be counted into the
hopper. The unit will continue counting and add the new count to the total.
To exit ADD function, press again the ADD button.
4.3
Batch Function
This function is available by pressing the BATCH or +1/+10 button on the control panel.
When BATCH function is activated, a “BATCH” icon with the batch number will be
displayed on the home screen.
Summary of Contents for Domino
Page 1: ......
Page 2: ......
Page 17: ...14 1 Hopper Sensor 2 Stacker Sensors 3 Upper Sensors Block 4 Lower Sensors Block 1 2 3 4 ...
Page 18: ......
