-21-
Fig. 25
Fig. 26
Fig. 27
• Apply Molub-Alloy 777-1 grease to the following area on the Nose
[18]
and then mount Pushing Lever
(B)
[40]
.
• Be sure to check Sensor Ass’y (B)
[39]
according to page 24 after reassembling the power assembly.
• Be sure to mount the Hex. Socket Hd. Bolt M5
[71]
to the Nose
[18]
.
• Insert the Rotor
[80]
into the Gear Box Ass’y
[79]
and check that the Rotor
[80]
turns smoothly by hand
as shown in Fig. 26.
NOTE: If the Rotor [80] cannot turn smoothly, the gear may be deformed or damaged. Replace the
Gear Box Ass’y [79] with new one.
• Be sure to mount Bumper (B)
[66]
to the Nose
[18]
as shown in Fig. 27 and then mount the Gear Box
Ass’y
[79]
.
Apply grease here.
[80]
[79]
[66]
