13. Install the Handshower
From the top of the bath or finished deck, insert the smaller end
of the interlock hose down into the hose guide and through the
mounting hole.
From the underside of the bath or finished deck, insert one
washer into the flexible hose.
Thread the flexible hose into the high pressure hose.
Insert one washer into the other end of the high pressure hose.
Connect the high pressure hose onto a vacuum breaker (if
installed), or onto the appropriate water source.
Run cold and hot water through the handshower hose to flush
out dirt and debris.
Check for leaks.
Turn the cold and hot water valves off.
For an elbow installation:
Insert the washer into the bottom of the elbow assembly.
Thread the handshower onto the elbow assembly.
Thread the handshower onto the elbow assembly.
For an upright installation:
Insert the screen washer into the end of the handshower.
Screen/
Washer
Handshower
Handshower
Washer
Washer
Water Source
High Pressure Hose
Washer
Interlock Hose
Interlock Hose
Washer
Elbow Assembly
Screen/Washer
Handshower
Elbow Installation
Upright Installation
113762-2-CD
18
Kohler Co.
