9. Install the Bath/Whirlpool
NOTE: If the installation includes a wall-mount shower:
Before the
bath/whirlpool is installed, plumb in the shower inlet to allow for
the connection to the transfer valve.
Install the wall shower (if applicable) before installing the
whirlpool bath.
Dry fit all the plumbing for the shower connections before
soldering.
Cover the escutcheons, hose guide, and transfer valve.
Install the bath/whirlpool according to the instructions packed
with the product.
NOTE:
Do not install the finished wall until the final connections are
made and the installation tested.
10. Solder the Connections
CAUTION: Risk of product damage.
Protect the backside of the
bath from excessive heat when soldering. Damage caused by
excessive heat is not covered by the warranty.
Dry fit all the plumbing connections before soldering.
Solder all the connections.
Wall Shower
Hot Valve
Transfer Valve
Cold Valve
Handshower
Transfer Valve
Kohler Co.
15
113762-2-CD
