8
unvented mains pressure system
the thermostatic mixer can be installed
with a unvented, stored hot water
cylinder.
note!
We recommend the use of a l/min
outlet Flow regulator (supplied).
Mains pressurised instantaneous hot
water system (thermal store)
the thermostatic mixer can be installed
with systems of this type with balanced
pressures.
note!
We recommend the use of a l/min
outlet Flow regulator (supplied).
Pumped system
the thermostatic mixer can be installed
with an inlet pump (twin impeller). the pump
must be installed on the floor next to the hot
water cylinder.
note!
We recommend the
use of a l/min outlet
Flow regulator (supplied).
air Separation
30°-60°
90°
