Kohler Mira Platinum Dual Page 56 Installation Manual Download

Page: 56 / 57

1199702-W2-H

Mira is a registered trade mark of

Kohler Mira Limited.

The company reserves the right to alter

product speciﬁ cations without notice.

14648

Guarantee

Your product has the benefi t of our manufacture's

guarantee which starts from date of purchase. This

guarantee only applies in the United Kingdom and

Republic of Ireland. To activate this guarantee, please

return your completed registration card, visit our

website or free phone 0800 5978551 within 30 days

of purchase (UK only).
Within the guarantee period we will resolve defects in

materials or workmanship, free of charge, by repairing

or replacing parts or product as we may choose.

This guarantee is in addition to your statutory

rights and is subject to the following conditions :

● The guarantee applies solely to the original

installation under normal use and to the original

purchaser only. The product must be installed and

maintained in accordance with the instructions

given in this guide.

● Servicing must only be undertaken by us or our

appointed representative.

Note!

If a service visit is required the product must

be fully installed and connected to services.

● Repair under this guarantee does not extend

the original expiry date. The guarantee on any

replacement parts or product ends at the original

expiry date.

● For shower fi ttings or consumable items we

reserve the right to supply replacement parts only.

The guarantee does not cover:

● Call out charges for non product faults (such as

damage or performance issues arising from

incorrect installation, improper use, inappropriate

cleaning, lack of maintenance, build up of

limescale, frost damage, chemical attack,

corrosion, system debris or blocked fi lters) or

where no fault has been found with the product.

● Water or electrical supply, waste and isolation

issues.

● Compensation for loss of use of the product or

consequential or indirect loss of any kind.

● Damage or defects caused if the product is

repaired or modifi ed by persons not authorised by

us or our appointed representative.

● Routine maintenance or replacement parts to

repaired or modifi ed by persons not authorised by

comply with the requirements of the TMV2 or

repaired or modifi ed by persons not authorised by

TMV3 healthcare schemes

● Accidental or wilful damage.

● Products purchased ex-showroom display.

What to do if something goes wrong

If your product does not work correctly refer to this

manual for fault diagnosis and check that it is installed

and commissioned in accordance with our instructions.

If this does not resolve the issue, contact us for help

and advice.

Helpdesk Service

Contact our Customer Services Team for

product advice, to purchase spare parts or

accessories or to set up service visit. You can contact

us via phone or e-mail - contact details below.

Please provide your model name, power rating (if

applicable) and date of purchase.

Mira Showers Website

(www.mirashowers.co.uk)

Visit our website to register your guarantee,

download user guides, diagnose faults, purchase our

full range of accessories and popular spares, or request

a service visit.

Spares and Accessories

We hold the largest stocks of genuine Mira

spares and accessories.Contact us for a

price or visit our website to purchase items from our

accessory range and popular spares. (Only available

in the United Kingdom )

Service/Repairs

No one knows our products better than our

nationwide team of Service Technicians. We

can carry out service or repair work to your product both

during and after the guarantee period. (Only available in

the United Kingdom and Republic of Ireland) Ask about

our fi xed price service repairs.

0800 001 4040

Fax: 01242 282595

Email – Visit

www.mirashowers.co.uk/contactus

By Post:

Mira Customer Services Dept, Cromwell

Road, Cheltenham, Gloucestershire GL52 5EP

To Contact Us: Eire Only

01 531 9337

E-mail:

[email protected]

To Contact Us: UK

(L15F, N85K, N85L, N86F) (1796)

CUSTOMER SERVICE

Summary of Contents for Mira Platinum Dual


























































Search results

Summary of Contents for Mira Platinum Dual

Reviews:

Related manuals for Mira Platinum Dual

Brands by name

Popular brands

Kohler Mira Platinum Dual, Installation Manual

Search results

Summary of Contents for Mira Platinum Dual

Reviews:

Related manuals for Mira Platinum Dual

Brands by name

Popular brands