41
1199702-W2-H
Isolate power to the Digital Mixer
Valve.
Press “
+
” and “ ” buttons
simultaneously until “
End
” is
displayed on the screen.
Restore power to the digital mixer
valve.
Briefly press the “
+
” and “ ” buttons,
“
SET
” will be displayed on the screen.
Note!
if display reads “
Err
”
press
“ ” and repeat the process.
Note!
Re-registering can only be performed if the wireless controller has previously
been assigned to a digital mixer. This is indicated by the clock time default 10:00
(when batteries are connected).
RE-REGISTERING
The wireless controller has previously been registered to the digital mixer at the
factory, if communication problems are encountered, a re-registering of the wireless
controller may be required.
A re-registering of the wireless controller must also be performed should the control
PCB in the Digital Mixer Valve be replaced.
To re-register the wireless controller to the Digital Mixer Valve carry out the following
sequence.
