Kohler Mira Platinum Dual Page 15 Installation Manual Download | Manualshive

Page: 15 / 57

background image

15

1199702-W2-H

Use of Flow Regulators with Combination Boilers

The Mira Digital Mixer Valve can demand hot water quicker than some instantaneous

water heaters/combination boilers can provide, especially in winter when the mains

water is colder. A Hot inlet flow regulator may need to be used to ensure that the

Digital Mixer Valve can deliver a full range of water temperatures.

Note:

Single

outlet digital mixing valves are factory fitted with an 8 l/min hot

inlet flow regulator. If installing a single outlet digital mixer with a combi boiler rated

36kW or greater or to mains pressurised systems the hot inlet flow regulator should

be removed.

Note:

Dual

outlet digital mixing valves do not have a factory fitted hot inlet flow

regulator. These are supplied in the component pack. The table indicates which

flow regulator should be fitted in the hot water inlet of the Mira Digital Mixer Valve if

installing to a combination boiler system.

Unscrew hot inlet plastic nuts and remove pipe and seal to gain access to the

checkvalve cartridge and filter.

Use flat blade screwdriver to carefully lever cartridge out.

Fit/remove the flow regulator from checkvalve cartridge behind filter as required.

Refit seal, pipe and plastic nut. Plastic nuts require hand tightening only.

Green

Orange

Dual outlet valve shown

Boiler Rating

24 kW (80,000 Btu/h) 30 kW (100,000 Btu/h) 36 kW (120,000 Btu/h)

Flow Regulator 7 litres/min

9 litres/min

Not required

Colour

White/Green

White/Orange

-

«
...
13
14
15
16
17
...
»

Summary of Contents for Mira Platinum Dual


























































Reviews:

No comments

Related manuals for Mira Platinum Dual

ShowerSelect 157431 Series

Brand: Hans Grohe Pages: 36

Brand: Sanela Pages: 2

Castylat KOMO FU1224

Brand: Kalia Pages: 12

CALEDONIA 06-4670PCHL

Brand: Taymor Pages: 2

KLASSICA 9564KL

Brand: Santec Pages: 6

Brand: Luxier Pages: 10

Klassica 9531KL-TM Series

Brand: Santec Pages: 12

comet footrest II 10289

Brand: comfortel Pages: 2

Brand: Anzzi Pages: 12

Brand: Glacier bay Pages: 4

Brand: Grohe Pages: 24

Brand: DABSTORY Pages: 8

Brand: SCHÜTTE Pages: 59

Brand: brondell Pages: 28

Brand: Villeroy & Boch Pages: 16

Brand: Kraus Pages: 4

Brand: Kraus Pages: 13

Brand: SereneLife Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands