Usage and Replacement of Battery for Remote Controller
Others
Kee
p pressing the
key until a short pip is heard, and release the key only after the night lamp flickers for three times.
When the setting of E/F/G/H/J/L/N is not modified for a certain period, repeat the process that is to keep pressing the key
G -
Open/close the cover…Sensing distance setting
●
Long press the key to set up the sensing distance for auto cover-turning:
1.Quick flashing of night light for one time means short-distance (short pip)
2.Quick flashing of night light for twice means mid-distance (short pip).
3.Quick flashing of night light for three times means long-distance (short pip).
4.If the nigh light flickers slowly, turn off the auto cover-turning function (long pip).
1.Quick flashing of night light once to activate the deodorization function (short pip).
2.Slow flashing of night light once to deactivate the deodorization function (long pip).
Then change thesetting of E/F/G/H/
J/
L/N by the following requirements.
E-Flush-full…Automatic flushing setting
●
Long press this key to turn off the function of automatic flushing. Long press it again to restore automatic flushing.
1.Quick flashing of night light once to activate automatic flushing function (short pip).
2.Slow flashing of night light once to deactivate automatic flushing function (long pip).
1.Quick flashing of night light once to activate energy saving function (short pip).
2.Slow flashing of night light once to deactivate energy saving function (long pip).
F-
One button sterilization
…Setting of UV automatic sterilization
●
Long press to set up the on/off status of automatic UV sterilization.
1.Quick flashing of night light once to activate the function of automatic UV sterilization (short pip).
2.Slow flashing of night light once to deactivate the function of automatic UV sterilization (long pip).
until a short pip is heard and release the key only after the night lamp flickers for three times before the next change of setting.
P -
Nozzle
movement…
Nozzle
cleaning settings
●
Under non-seating status, long press this key to activate the function of manual cleaning. The nozzle can be cleaned manually. Long press it again or press
Stop key to deactivate this function.
Charging
battery docking station
of remote controller uses 4 #5 alkaline batteries.
When the battery is not low, red LED blink or light up on
docking station, remind customer to replace the battery.
Caution:
1.The positive and negative polarities of battery must be consistent with the
mark of remote controller.
2.New and old batteries shall not be mixed.
3.Please use alkaline battery
Do not put the remote control at a place where it may be sprayed by liquid, or immersed in liquid.
Do not place it near hand dryer, hair dryer and small size home appliances, to avoid disturbance of normal
usage of the remote control.
Do not apply external force to the key zone of remote controller frequently or fiercely.
After usage of remote control, put it back into the holder mounted on wall.
Prevent dropping the remote control during usage.
Anti-theft function: remote controller can be locked and fixed to the base via screws. Refer to the installa-
tion instructions for detailed methods.
Red Lamp Flicker
H-Ring OPEN/CLOSE… Prolonged seating indication setting
1.
Night light quick flash once (short beep), prolonged seating indication function activated.
2.
Night light slow flush once (long beep), prolonged seating indication function deactivated.
hold and press to setup prolonged seating indication function.
1.
Short beep: night light function activated.
2.
Long beep: night light function deactivated.
J-
Spiral wash… night light function setting
hold and press to setup night light function.
●
●
L -Seat On/Off…Deodorization function setting
●
Long press this key to turn on/off the deodorization function.
N-Seat temp…Energy saving setting
●
Long press the key of Seat Temp to activate the function of energy saving. Long press it again to deactivate this function.
1307181-TW01-A
32
Kohler Co.
