●
When energy saving is activated, product shall auto detect idle duration and decrease ring temperature to
achieve energy saving purpose.
●
For details of automatic energy saving, see Page 32 .
1.
Water used for rear/spiral/front wash has been purified.
i.When filter cartridge is almost due, the orange LED keeps ON (as shown).
ii. The filter cartridge is expired, the orange LED flashing.
iiii. Refer to page 41 for exchange filter cartridge.
Automatic energy saving function
Water purification
Deodorizing/Air Purification
3.
Manual s terilization function
□
When unseated, press “one button sterilization” button on remote, activate wand sterilization function / bowl clean function (details
refer to remote user’s manual).
Kohler Co.
39
1307181-TW01-A
1.
2.
Auto activates air purification function when deodorizing function is activated.
Press “ ”on remote to activate air purification function, refer to page 31 .
* Air purification (refers to ±ion generated by ±ion generation device, sterilization performance): eliminate bacteria within air purification period, which does not represent mold,
dust clean etc. incidental effects. The antibacterial rate is more than 80% (test condition: air purification amount is 3m3/h).
*Sterilized water (refers to refers to the tap water containing hypochlorite generated by chlorine ions after ionization): wash nozzle surface by sterilized water generated within
working cycle, reduce bacteria growth on nozzle surface, and represent the mildew and other incidental effects. The antibacterial rate is more than 99% (Perform tester per G/T
5750.12-2006, the content of chlorine ions in tap water is >24ppm, different water quality might cause different sterilization effect).
E-water performs nozzle sterilization function.
□
After a user leaves the toilet under the mode of Front, Rear or Spiral, the toilet will activate the function of sterilization by sterilized
water.
sterilized water*
2.wate r performs bowl internal sterilization function.
□
After customer used toilet, unseated and complete flushing, and toilet will auto start sterilization function.
1.
*
UV sterilization (refers to the ultraviolet sterilization generated by UV lamp): during UV working period, eliminate bacteria, reduce bacteria growth on nozzle surface, this does not
represent the mildew and other incidental effects. The antibacterial rate is more than 99% (measured after an UV work cycle).
●
Manual UV sterilization
□
When unseated, press “one button sterilization” button on remote, activate UV sterilization function (details refer to remote user’s manual).
□
During UV sterilization process, if there’s customer open lid and use toilet, or press STOP button on remote, UV sterilization function will
be terminated.
iii. Improper filter cartridge installation, the orange and white LED flashing in turn.
□
During UV sterilization process, if there’s customer open lid and use toilet, or press STOP button on remote, UV sterilization function
will be terminated.
□
For setting of automatic UV function, see page 32 .
