This guide of trouble shooting is for general help only. Authorised representatives or qualified elec-tricians of
Kohler Company shall be able to solve all electrical failures. If you want to know about the service of warranty,
please contact local dealers or wholesalers.
Trouble shooting
Kohler Co.
45
1307181-TW01-A
Possible reasons
Suggestions and measures
1.
Toilet does not work
2. Toilet can not flush A. Water failure
B. Tee valve for water supply is closed
C. Power failure
D. Product is at standby mode
E. Wash mode is in progress
F. Auto-flushing is deactivated
3. Toilet is not clean
after flushing
A. Filter screen is blocked
B. Water pressure is insufficient
4.
5. Flushing mode
stops in the
operation process
6. The wash mode
runs even when no
one is sitting on the
toilet.
A. Remove the foreign matters or dry the seat
7.
Dryer fan stops
in .the operation
process
8. Deodorization fan
not work
A. The seat is unable to sense human body
B. Stop button is pressed by mistake during operation
C. Auto deodorization function is deactivated
Troubles
A. Power failure
B. Plug not connected or no power to socket
A.
Refer to "Washing of filter screen"
Wash mode is
abnormal
A. Wait until the water supply is restored
B. Fully open the tee valve for water supply
D. Sit on or adjust your sitting posture
F. Refer to "Guide on setting of remote controller"
A. Water failure
B. Tee valve for water supply is closed or not opened
completely
C. Product is at standby mode
D.Not yet seated or current sitting posture unable
to be sensed by the seat
E. Filter screen is blocked
F. Water pressure is insufficient
G.Incorrect water purification filter cartridge
installation.
A. Flushing mode stops automatically after
continuous flushing for 5 minutes
B. The seat is unable to sense human body
A. If necessary, press the flushing button again.
B. Adjust your sitting posture or sit on the toilet
again.
A. The seat is covered by foreign matters or the
seat is wet
A. The dryer fan stops automatically after continuous
usage for 4 minutes
B. The seat is unable to sense human body
A. If necessary, press the Dryer button again
B. Adjust your sitting posture or sit on the toilet
again
A. Adjust your sitting posture or sit on the toilet
again.
B. If necessary, please seat on again 2s after
seat off.
C. Refer to "Guide on setting of remote controller"
C. The leakage circuit breaker at cable plug can not
reset
D. Product is at standby mode
A. Wait until the power is restored
B. Insert the plug or detect the power socket
C. Press Reset button on the plug
D. Press “ “button on side panel.
B.
Check if all tee valves are opened. If not, please
open
C.
Check if the inlet hoses are bent. If so, adjust
the hoses.
C.Press “ “button on side panel.
E. Refer to the section of "Washing the filter screen"
F. Check if the inlet hoses are bent. If so,adjust
the hoses.
G.
Correct purification filter cartridge installation
(refer to Page 41).
A. Wait until the water supply is restored B.
Open the tee valve for water supply
C. Wait until the power is restored or check
"manual flushing" to have manual flushing
or through use of basin
D
.
Press “ “button on side panel.
E. Do it after the operation at wash mode is
completed
