1024937-2-
A
14
Kohler Co.
4. Fasten the Receptor in Place
NOTE:
If the unit is shimmed, make sure the length of the fasteners is sufficient to span the shims and penetrate
into the studs at least 1” (2.5cm).
-
Tack the corners of the receptor into place using #6 large head galvanized nails (not supplied) to fasten the unit.
-
Shim the receptor as needed at each of the remaining wall studs and finish nailing the receptor into place in the
predrilled holes.
NOTE:
The finished walls should be installed as plumb as possible. If the finished walls are not plumb, the
shower door installation will be affected.
-
Complete the finished walls.
