1024937-2-
A
7
Kohler Co.
Align these two surfaces
on both walls
8” (20.3cm)
Align these vertical
surfaces on both walls
6. Pre-fit the Shower Walls Together
NOTE:
The module must be plumb and level. The shower door will not install properly if the module is not
plumb and level.
-
Carefully move the wall assembly onto the receptor.
-
Align the receptor and the walls.
-
Check and align the walls for plumb and level.
-
If walls are not plumb and level, go to section 7, “Shimming Procedures”.
-
Predrill the nail-in flanges on the stud centers and around the walls on 8” (20.3cm) centers. Do not nail the walls
in place at this time.
