8. Install the Sink
CAUTION: Risk of personal injury or product damage.
Cast iron sinks are very heavy. Get
assistance lifting the sink.
Cut a 1x4 piece of support framing for the back wall.
Install the 1x4 support framing flush with the top of the countertop using screws (not provided)
fastened into the studs.
Install the faucet to the sink.
With assistance, lower the sink into the cabinet.
Connect the faucet and install the drain.
Apply a bead of 100% silicone sealant around the rim of the sink.
Cleaning Your Sink
For best results, keep the following in mind when caring for your KOHLER product:
•
Always test your cleaning solution on an inconspicuous area before applying to the entire surface.
•
Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse and
dry any overspray that lands on nearby surfaces.
•
Do not allow cleaners to soak on surfaces.
•
Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring
pad to clean surfaces.
•
Be careful not to leave staining materials in contact with the surface for extended periods of time.
•
The ideal cleaning technique is to rinse thoroughly and blot dry any water from the surface after
each use.
1x4 Support
Framing
1330810-2-A
10
Kohler Co.
