Reassembly
93
19 690 01 Rev. --
KohlerEngines.com
Install Valve Covers
Torque Sequence
4
1
2
5
3
1. Make sure sealing surfaces are clean and free of
any nicks or burrs.
2. Install valve covers on same side as they were
originally installed using new gaskets.
A J-Clip is mounted on screw closest to intake port.
3. Check position of each cover and gasket, then
torque screws to 10.9 N·m (96 in. lb.) using
sequence shown.
Breather Assembly Components
E
B
A
C
D
F
A
Breather Cover
B
Gasket
C
Sealant Bead
D
Filter
E
Reed Retainer
F
Reed
Install Breather Assembly
Torque Sequence
5
4
3
2
1
1. Make sure sealing surfaces of crankcase and
breather cover are clean and free of any nicks or
burrs. Do not scrape surfaces, as this could result
in leakage.
2. Install reed and reed retainer. Torque screw to 11.3
N·m (100 in. lb.).
3. Install
fi
lter. Make sure
fi
lter does not extend above
top surface.
4. Install breather gasket with sealant bead up
(towards cover).
5. Install cover and screws. Torque to 11.3 N·m
(100 in. lb.) following sequence.
Summary of Contents for Command Pro ECV850
Page 102: ...KohlerEngines com 19 690 01 Rev 102...
